The right 35x45x10 shaft seal for the job: the Oil Seal 35x45x10 NBR TC is a spring-loaded TC lip seal, 35x45x10 mm, in oil-resistant NBR nitrile — built for 35 mm shafts and 45 mm bores found in workshop motors, helical gearboxes, vane pumps and tractor attachments.
Dimensions & specifications
| Inner diameter (shaft) | 35 mm |
| Outer diameter (bore) | 45 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
The TC layout brings three protections together: a rubber outer surface that grips the housing bore, a garter-spring lip that tracks slight shaft movement, and a secondary dust lip that blocks grit before it reaches the sealing edge.
Why NBR for this seal
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
If your shaft measures a few tenths of a millimetre under the nominal size, that is normal — the sealing lip is designed with interference for exactly that.
Ordering & delivery
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.