A 60x72x8 mm TC double-lip seal moulded in NBR nitrile rubber: the Oil Seal 60x72x8 NBR TC restores tight sealing on 60 mm shafts and 72 mm bores used in industrial gearboxes, conveyors and mid-size rotating equipment.
Specifications
| Inner diameter (shaft) | 60 mm |
| Outer diameter (bore) | 72 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
The TC layout brings three protections together: a rubber outer surface that grips the housing bore, a garter-spring lip that tracks slight shaft movement, and a secondary dust lip that blocks grit before it reaches the sealing edge.
Why NBR for this seal
This is an NBR-nitrile seal — the everyday elastomer for oil-lubricated equipment, compatible with mineral oils, greases and hydraulic media. For longest life, avoid brake fluid contact and store spares away from direct sunlight.
Don’t worry if your micrometer shows the shaft a few tenths under size — the garter-sprung lip is designed to seal against exactly that condition.
Buying & shipping information
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.