The Oil Seal 50x60x10 NBR TC (50x60x10 mm) renews the sealing on a 50 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in large reducers, belt-conveyor pulleys, slurry pumps and construction machinery.
Size and material details
| Inner diameter (shaft) | 50 mm |
| Outer diameter (bore) | 60 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
As a TC-pattern seal it seals in two stages: a primary spring-loaded lip holds the oil film on the shaft, while a second lip fends off dust and water spray; the rubber-covered case keeps the whole unit anchored in the bore.
Why NBR for this seal
NBR (Nitrile) is the standard compound for general industrial sealing. It handles mineral oils, greases and hydraulic fluids, which is why it is the default choice in gearboxes, electric motors and pumps. Keep it away from brake fluid, and store spare seals out of direct sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Order details
- Sold individually — buy one or one hundred, all prices in USD.
- Where customs charges duties or taxes on entry, the buyer covers them; they are not part of our pricing.
- Ships worldwide at one flat rate · tracking number provided by email.
- For sizing help, use how to measure an oil seal or send us your dimensions — free pre-sale checks.
Reviews
There are no reviews yet.