If your 40 mm shaft is weeping oil, the Oil Seal 40x65x12 NBR TC — a TC spring-loaded seal at 40x65x12 mm — restores the barrier between the 65 mm housing and the outside world. A staple size for AC motors, worm gearboxes, gear pumps and harvest machinery.
Technical specifications
| Inner diameter (shaft) | 40 mm |
| Outer diameter (bore) | 65 mm |
| Width | 12 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Inside the TC double-lip design
The TC layout brings three protections together: a rubber outer surface that grips the housing bore, a garter-spring lip that tracks slight shaft movement, and a secondary dust lip that blocks grit before it reaches the sealing edge.
Material: NBR – Nitrile
The compound is NBR nitrile, selected for oil-and-grease compatibility across motors, reducers and pumps. Note the limits: brake fluid degrades nitrile, and sunlight ages stored rubber — so store spares dark and dry.
Measuring your shaft a few tenths under the nominal figure is expected; the spring-loaded lip is built to seal with that small interference.
Purchase and delivery notes
- Price is for 1 piece — order any quantity, no minimum; listed in US dollars.
- Any import duty or tax imposed by your country is the buyer’s responsibility and excluded from our prices.
- Flat-rate shipping to every country · tracking number sent by email.
- For a size check, How to measure an oil seal walks you through it, or send us your dimensions for free advice.
Reviews
There are no reviews yet.