Built to 30x48x8 mm (ID 30 / OD 48 / width 8), the Oil Seal 30x48x8 NBR TC gives 30 mm shafts a fresh, leak-free seal in the 48 mm housings of workshop motors, helical gearboxes, vane pumps and tractor attachments.
Specifications
| Inner diameter (shaft) | 30 mm |
| Outer diameter (bore) | 48 mm |
| Width | 8 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
Every TC seal combines three elements: a rubber-covered case that grips the bore, a spring-loaded sealing lip that follows shaft runout, and a dust lip that shields the main lip from contamination.
Why NBR for this seal
Material-wise this is NBR nitrile: a balanced compound for mineral oil, diesel-range fuels and greases at moderate temperatures — ideal for rotating equipment. Two cautions: no exposure to glycol-based brake fluid, and keep stock seals out of sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Order details
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.