Sized 17x30x10 mm (inner × outer × width), the Oil Seal 17x30x10 NBR TC seals a 17 mm shaft running in a 30 mm bore. This size turns up often in small electric motors, power tools, pumps and instrument gearboxes.
Dimensions & specifications
| Inner diameter (shaft) | 17 mm |
| Outer diameter (bore) | 30 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
NBR nitrile rubber at a glance
Made of NBR (acrylonitrile-butadiene rubber), the seal tolerates the mineral oils and lithium greases that lubricate most machinery. Standard practice: keep NBR away from brake fluid, and store unused seals in their bag, out of sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Ordering & delivery
- Sold individually — buy one or one hundred, all prices in USD.
- Where customs charges duties or taxes on entry, the buyer covers them; they are not part of our pricing.
- Ships worldwide at one flat rate · tracking number provided by email.
- For sizing help, use how to measure an oil seal or send us your dimensions — free pre-sale checks.
Reviews
There are no reviews yet.