The right 14x35x7 shaft seal for the job: the Oil Seal 14x35x7 NBR TC is a spring-loaded TC lip seal, 14x35x7 mm, in oil-resistant NBR nitrile — built for 14 mm shafts and 35 mm bores found in light-duty motors, drills, mini pumps and small gearbox assemblies.
Technical specifications
| Inner diameter (shaft) | 14 mm |
| Outer diameter (bore) | 35 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
TC seals work with a triple defence — a rubber-coated case seating tightly in the bore, a main lip held against the shaft by a garter spring, and an outer dust lip that keeps abrasive particles away.
Why NBR for this seal
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Order details
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.