The Oil Seal 14x24x5 NBR TC combines a 14 × 24 × 5 mm envelope with the proven TC double-lip geometry, making it a dependable fix where light-duty motors, drills, mini pumps and small gearbox assemblies need reliable shaft sealing.
Technical specifications
| Inner diameter (shaft) | 14 mm |
| Outer diameter (bore) | 24 mm |
| Width | 5 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
Why the TC profile is so widely used
The TC layout brings three protections together: a rubber outer surface that grips the housing bore, a garter-spring lip that tracks slight shaft movement, and a secondary dust lip that blocks grit before it reaches the sealing edge.
Why NBR for this seal
Nitrile rubber (NBR) is the workhorse of oil sealing: fully compatible with mineral oils, lubricating greases and common hydraulic fluids — the media found in most gearboxes and motors. Avoid contact with brake fluid, and keep spares shaded from sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Ordering & delivery
- Sold per piece — no minimum order, priced in US dollars.
- Prices exclude any import duties or taxes; if your customs authority charges them, they are the buyer’s responsibility.
- One flat shipping rate worldwide · tracking number by email.
- To confirm this is the right size, see how to measure an oil seal, or send us your dimensions — pre-sale size checks are free.
Reviews
There are no reviews yet.