The right 12x26x7 shaft seal for the job: the Oil Seal 12x26x7 NBR TC is a spring-loaded TC lip seal, 12x26x7 mm, in oil-resistant NBR nitrile — built for 12 mm shafts and 26 mm bores found in light-duty motors, drills, mini pumps and small gearbox assemblies.
Size and material details
| Inner diameter (shaft) | 12 mm |
| Outer diameter (bore) | 26 mm |
| Width | 7 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
About the TC profile
The TC layout brings three protections together: a rubber outer surface that grips the housing bore, a garter-spring lip that tracks slight shaft movement, and a secondary dust lip that blocks grit before it reaches the sealing edge.
About the NBR nitrile compound
Material-wise this is NBR nitrile: a balanced compound for mineral oil, diesel-range fuels and greases at moderate temperatures — ideal for rotating equipment. Two cautions: no exposure to glycol-based brake fluid, and keep stock seals out of sunlight.
Don’t worry if your micrometer shows the shaft a few tenths under size — the garter-sprung lip is designed to seal against exactly that condition.
Ordering & delivery
- Every order is per piece with no MOQ; payments in US dollars.
- Prices exclude duties and taxes that your customs may assess — those are the buyer’s obligation.
- Flat worldwide shipping · email delivery of the tracking number.
- Double-check dimensions before ordering: how to measure an oil seal, or message us your size for a free check.
Reviews
There are no reviews yet.