The Oil Seal 10x25x10 NBR TC (10x25x10 mm) renews the sealing on a 10 mm shaft where grease or oil must stay in and grit must stay out — a typical fitment in light-duty motors, drills, mini pumps and small gearbox assemblies.
Size and material details
| Inner diameter (shaft) | 10 mm |
| Outer diameter (bore) | 25 mm |
| Width | 10 mm |
| Seal type | TC — double lip, rubber covered, garter spring |
| Material | NBR – Nitrile |
| Temperature range | -30 °C … +100 °C |
How the TC design works
TC is the standard rotary-shaft profile for good reason: a rubber OD seals the bore side, a spring-loaded lip seals the shaft side, and a dust lip extends service life in dirty environments.
Material: NBR – Nitrile
Made of NBR (acrylonitrile-butadiene rubber), the seal tolerates the mineral oils and lithium greases that lubricate most machinery. Standard practice: keep NBR away from brake fluid, and store unused seals in their bag, out of sunlight.
Should the shaft read slightly below the listed size — typically a few tenths of a millimetre — no concern: the lip’s interference fit accounts for it.
Buying & shipping information
- Each listing is for one seal — no MOQ, all prices in US dollars.
- Import duties or taxes, if levied by your customs, are paid by the buyer and are not included in the price.
- Worldwide shipping at a single flat rate, with a tracking number emailed to you.
- To double-check the size, read how to measure an oil seal or contact us with your dimensions — size checks before purchase are free.
Reviews
There are no reviews yet.